Article Furniture Assembly in Toronto: Quality Pieces, Real Assembly Notes
Article ships solid-wood and quality engineered-wood furniture across Canada. The pieces are well-made — but a few quirks affect assembly time.
- Article uses quality materials — solid wood and hardwood veneer, not standard MDF
- Hardware is well-packed and rarely missing
- Solid wood pieces are heavier than flat-pack average — factor in two-person lifts
- Some Article pieces require pre-drilling; their instructions note this but it's easy to miss
Article Quality
Article is a Vancouver-based furniture brand that sells direct-to-consumer across Canada. Unlike most flat-pack furniture, many Article pieces use solid wood or hardwood veneer over quality engineered wood — not MDF. The difference shows in weight, finish consistency, and longevity.
Their hardware kits are well-organised, usually bagged by step, with clear instructions. Missing hardware is rare. The assembly experience is closer to a mid-range European brand than a typical Amazon piece.
Assembly Notes
A few Article-specific things worth noting: some pieces require pre-drilling pilot holes before driving screws — the instructions flag this, but it's easy to miss on first read and skipping it can crack the wood. Have a drill with a small bit available.
Their upholstered pieces (sofas, chairs) typically arrive in multiple boxes and require attaching legs and sometimes a back section. These go together quickly. Their case goods (dressers, sideboards) take longer — plan for 1.5–2 hours for a typical dresser.
Solid Wood Weight
A solid walnut or oak Article dresser can weigh 80–120 lbs assembled. Moving it into position after assembly, especially in a condo bedroom with limited turning radius, often requires two people. Plan for this before booking a solo assembly visit.
If your unit is above ground floor, confirm elevator timing with your building — Article deliveries come white-glove or threshold depending on what you ordered, but the actual carry-in is your responsibility for threshold deliveries.
Typical Timeline
Article nightstand: 30–45 minutes. Dresser: 1.5–2 hours. Dining table: 45–60 minutes. Upholstered sofa (legs + back): 30–45 minutes. Large storage unit or sideboard: 1.5–2 hours.
Assembly rate is $30/hr with a 2-hour minimum. For a single Article dresser, the visit typically runs right around the minimum. For a larger order of multiple pieces, the hourly rate applies beyond the first 2 hours.
Need help in downtown Toronto?
Flat $30/hr. Assembly, mounting, repairs. Pay only after the work is done.